Comparison of Concrete Mix Design Methods Based on SNI 7656:2012 and Circular Letter of the Minister of PUPR No. 07/SE/M/2016 with Optimum Curing
DOI:
https://doi.org/10.23960/rekrjits.v30i1.151Keywords:
Beton, Kuat Tekan, Rancang Campur, SK PUPR 2016, SNI 7656:2012Abstract
The Circular Letter of the Minister of Public Works and Public Housing Number 07/SE/M/2016 (SE) supports low-carbon policies. SNI 7656:2012 (SNI) is still frequently used. Both methods accommodate OPC, PPC, and PCC cement. This study aims to find the differences between the two guidelines. The study was conducted experimentally with a target compressive strength of 25 MPa. The immersion curing duration was 26 days for the 28-day compression test sample, and 54 days for the 56-day compression test sample. The number of samples for each test from each method at each age was 3. The results were analyzed using the Dixon criteria. The analysis results showed that the SNI method produced a 10% higher cement content than SE, with an average compressive strength of 26.15 MPa; SE achieved a compressive strength of 22.12 MPa. The target compressive strength with the SE method was achieved at 90 days.
Downloads
References
Septiani V., Suryan V., Amalia D.: Faktor-faktor yang memengaruhi campuran beton: Rancangan beton, kekuatan beton, dan karakteristik beton. Journal of Engineering and Transportation (JET), 2, 1, 2024.
BSN: SNI 03-2834-2000: Tata cara pembuatan rencana campuran beton normal, 2000, https://repository.unikom.ac.id/64987/1/sni-03-2834-2000.pdf, 27.04.2026
BSN: SNI 7656:2012: Tata cara pemilihan campuran untuk beton normal, beton berat, dan beton massa. Badan Standar Nasional, Jakarta, 2012.
Kementerian PUPR: Surat Edaran Menteri Pekerjaan Umum dan Perumahan Rakyat Nomor 07/SE/M/2016 tentang Pedoman Tata Cara Penentuan Campuran Beton Normal dengan Semen Portland yang Menggunakan Abu Terbang. Kementerian PUPR, Jakarta, 2016.
Ircham M.: Ministry of PUPR Encourages the Use of Environmentally Friendly Cement Materials, 2023, https://asi.or.id/id/cdkementerian-pupr-dorong-penggunaan-material-semen-ramah-lingkungan/, 27.04.2026
Arief A.M.: Produksi Semen OPC Bakal Dikurangi, 2019, https://ekonomi.bisnis.com/read/20190730/257/1130304/produksi-semen-opc-bakal-dikurangi, 27.04.2026
Negoro S., Mangku S.A.: Perbandingan Beton Normal menggunakan Semen Portland Pozzolan Cement (PPC) berdasarkan Ketentuan SNI 7656:2012 dan Surat Edaran Menteri PUPR NO.07/SE/M/2016. Skripsi, Universitas Wiraraja, Sumenep, 2025.
Foulhudan J., Nurtanto D., Krisnamurti.: Perbandingan Mix Design SNI 03-2834-2000 dan SNI 7656: 2012 ditinjau dari Proses Pengecoran Beton Normal. Jurnal Riset Rekayasa Sipil Universitas Sebelas Maret, 5, 2, 2022.
Alkhaly Y.R.: Perbandingan Rancangan Campuran Beton Berdasarkan SNI 03-2834-2000 dan SNI 7656:2012 pada Mutu Beton 20 MPa. Teras Jurnal, 6, 1, 2016.
Hunggurami E., Bolla M.E., Messakh P.: Perbandingan Desain Campuran Beton Normal menggunakan SNI 03-2834-2000 dan SNI 7656: 2012. Jurnal Teknik Sipil, VI, 2, 2017.
Kuntari H.D., Lingga A.A., Supriyadi A.: Analisis Perbandingan Desain Campuran Beton Normal menggunakan SNI 03-2834-2000 dan SNI 7656: 2012 dengan Kuat Tekan 30 MPa. Universitas Tanjung Pura, Pontianak, 2017.
ASTM International: ASTM E178-21: Standard Practice for Dealing with Outlying Observations. ASTM International, West Conshohocken, PA, 2021.
Rahman M.A., Rasid M.A., Khatun R.: Effect of Curing Period on the Properties of Concrete. IOSR Journal of Engineering (IOSRJEN), 13, 8, 2023, 52-57.
Kurtis.: Portland cement hydration. School of civil engineering, Georgia Institute of Technology, Atlanta, Georgia, 2015.
Okafor F.O., Ewa D.E.: Estimating Formwork Striking Time for Concrete Mixes. Building, Civil & Geotechnical Engineering, 35, 1, 2016, DOI:10.4314/njt.351.1040
Thomas J., Jenning H.: The science of concrete. American Concrete Association, Center for Advanced Concrete Based Materials Research, 2008.
Termkhajornkit P., Nawa T.: A Study of composition of C-S-H gel in cement paste. Recent Development of Concrete Technology and Structure, 2nd ACF International Conference, November, 2006.
Niken C., Tjahjono E., Supartono F. X.: Rheological model of concrete shrinkage. International Journal of Technology, 12, 1, 2021, 217-227, DOI:10.14716/ijtech.v12i1.2818
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 REKAYASA: Jurnal Ilmiah Fakultas Teknik Universitas Lampung
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
